|
The red form is designed to perform a series of tests. It is equipped with a system fitted with cartridge discharge pneumatic actuators that allow complete control of function through the management software. In compliance with the rules of saving the environment even watch this module is designed to recover the water used for ITest. After appropriate filtering, the water is recirculated to perform subsequent tests.
Test washing basin
Use the form red is possible to test washing basin of sanitary required by law. The test is to wet with water, the inner surface of the basin, is then sprinkled with a default quantity and quality of sawdust. Is performed one cycle of discharge normal health. Analyzing the surface of the basin remained covered with sawdust must be established, remaining up to 50 cm total square covered. This measurement is of obvious but difficult to judge. To this end we have developed our system Rotocam, to analyze the inner surfaces of the pelvis accurately and fully automatically. The Rotocam scan the inner surfaces of the basin, and analyzes the images obtained by computing, software algorithms with our implementation, the clean surfaces which still covered with sawdust. The test results are then stored and presented on a special form customized for the client.
Test the spray outside of the jar
The existing law provides that health care is carried out on a test even Mitered verification of the quantity of splashing water (and consequently also of the contaminant) during a normal cycle of discharge. The test is done by laying a sheet of paper idrosensible of sufficient size at the base of health on the appropriate support panel provided with the module. After a normal cycle of discharge, the medium with the paper idrosensible is placed within a set time in the position of the optical reader. A special camera will automatically capture the image of leaflet highlighting the clear drops of water collected from the paper. Obviously the drops to be considered are just those that fall within a circle of area and various measures known from model to model of health. Consequently, for a clear interpretation of the results, we can give to the customer's request, some sheets of paper printed with idrosensible indications of different surfaces for each model produced by the Customer. Again the results can be stored and printed on a special form.
|