Programmer Ribbon cycles at step / broken in the standard 72x72mm.
The ATR620 is the most suitable for the automation of furnaces in the glass, ceramics and for heat treatment or another. The dual display allows users to visualize the process, the set points, the loop running, the temperature of the end step, the proportion of command output, the time elapsed from the start, the step being run and the consumption in kWh. The scrolling feature faster cycle times and manual control output control ensures complete control of the plant. For applications where it is necessary to control two regions (eg, furnaces with double extended), the feature "double loop" warrants (connecting two probes) of the same alignment and uniform cooking within the whole volume. Programming 20-step / broken per cycle, waiting time, so step programmable (useful if the plant fails to reach the desired temperature in the allotted time), recovery cycle in case of power cut-off gradient set or automatic , for the most demanding applications. Other features increase the flexibility of the instrument: 2 programmable digital inputs for alarms / Start / Stop, according to simple rules and starting the cycle reset by SET, relay output / SSR to control resistance or gas burners and auxiliary alarms, delayed start (useful cycles per night) and Master / Slave for managing data from serial line (RS485 prot. ModBus, up to 32 loops).