Cabin finishing with a layer of water filtration mod. "MINIVELO", mainly consisting of:

• Self-supporting paneled structure made in galvanized sheet-bent thick.
• Water and dust collection tank with sloped attack exhaust 3 "
• Bracket to hold the pump in suspension, avoiding the draft under the basin;
• Extends the front cabin from L = 750 mm. H = 2250 mm, inside:
       1. Floor full grid of the hopper and bin, recovery dry powder;
       2. Grilled Floor resealable adjustable 0 / 2, 5 / 5 cm.
       3. Prepared for the restoration of air above.
• Fan rear suction.
Thus was a winding passage that forces the air stream to knock on at least 2 surfaces of water before you go out by the filter, so particles in suspension to adhere to and deposited in the collection tank and only the air freely across the different veils and is expelled outside.
Technical data of the model:
- Model                                    MINIVELO 1200
- Capacity                                 2000 m³ / h
- Electric  power                        0.75 Hp
- N ° and  pump power.              1 x 1 Hp
- N ° rpm                                  1400
- Voltage                                  230/400 Volt.50 HZ.
- Size / Dimension                      1200x1200xH = 2350 mm.
- Overall height                         1,000 mm

Options
- BOX soundproofed to the fan inlet
- Fan of reinstatement on the extension, complete with manual adjustment of the damper flow, and soundproof box with connection for external Ø 250 mm.